mooklepticon@lemm.ee to 3DPrinting@lemmy.worldEnglish · 7 days agoPETG is just as stringy as I was toldfiles.catbox.moeexternal-linkmessage-square14fedilinkarrow-up14arrow-down10file-text
arrow-up14arrow-down1external-linkPETG is just as stringy as I was toldfiles.catbox.moemooklepticon@lemm.ee to 3DPrinting@lemmy.worldEnglish · 7 days agomessage-square14fedilinkfile-text
Yikes. Gonna have to work with this material a bunch to learn how to use it. Model - https://www.thingiverse.com/thing:1545913
minus-squareschmaker@schmaker.eulinkfedilinkarrow-up0·edit-27 days ago@mooklepticon Just printing my first #PETG on #Ender 70°C bed 260°C nozzle on the bed 225°C nozzle afterwards The difference from defaults is huge 😀 Edit: I also attached a pic, but for some reason it did not federated. Let’s try a link then schmaker.eu/photos/schmaker/im…
minus-squaremooklepticon@lemm.eeOPlinkfedilinkEnglisharrow-up0·7 days ago 260°C nozzle on the bed 225°C nozzle afterwards Wow, that’s a huge difference between 1st layer and later! I’ve never seen that big a delta.
minus-squareschmaker@schmaker.eulinkfedilinkarrow-up1·7 days ago@mooklepticon I think my Z-offset is too high and I’m compensating it with temperature, but I don’t care - nozzle cleans itself well, prints well and even structure is good. When it works, don’t touch it 😀
@mooklepticon Just printing my first #PETG on #Ender
70°C bed
260°C nozzle on the bed
225°C nozzle afterwards
The difference from defaults is huge 😀
Edit: I also attached a pic, but for some reason it did not federated. Let’s try a link then schmaker.eu/photos/schmaker/im…
Wow, that’s a huge difference between 1st layer and later! I’ve never seen that big a delta.
@mooklepticon
I think my Z-offset is too high and I’m compensating it with temperature, but I don’t care - nozzle cleans itself well, prints well and even structure is good.
When it works, don’t touch it 😀